Radiator Cover Measurement Guide
PLEASE READ CAREFULLY BEFORE PLACING YOUR ORDER
Radiator covers without shelving or side storage
To ensure your radiator has enough room to breathe under the radiator cover there needs to be at least the minimum cm added as per the below on to your radiator measurements each way. This includes the top shelf overhang of 2cm.
Anything smaller than this the cover will NOT fit.
Width - (valve to valve) & add 10cm (5cm each way)
Height - (Floor to the top of the radiator) & add 5cm
Depth - (Wall to the front of the radiator) & add 6cm
If your radiator is in an alcove, close to a door frame or under a window sill please contact us with your measurements and we can help advise on measurements.
My measurements are external - MDF used is 18mm - Please bare this in mind.
Please see the diagram below, when choosing your measurements from my options please make sure to add on the room each way to allow adequate ventilation for your radiator underneath.
Skirting board
Measure the height and depth of your skirting board in CM, this will allow the radiator cover to fit flush to the wall.
If you don’t require a skirting board cut out please don’t add this.
Radiator covers with side shelve or Draws
To ensure your radiator has enough room to breathe under the radiator cover there needs to be at least the minimum cm added as per the below on to your radiator measurements each way.
Width - (valve to valve) & add 10cm (5cm each way)
Height - (Floor to the top of the radiator) & add 5cm
Depth - (Wall to the front of the radiator) & add 6cm
Please follow the instructions above with regards to the allowance added each way for the height and depth.
The width entered needs to be the overall width including the side shelves or draws.
For this product we advise adding your internal radiator measurements into the notes section.
Please be aware that the top shelf has an overhang of 2cm each way.
Radiator covers with Draws above
To ensure your radiator has enough room to breathe under the radiator cover there needs to be at least the minimum cm added as per the below on to your radiator measurements each way.
Width - (valve to valve) & add 10cm (5cm each way)
Height - (Floor to the top of the radiator) & add 5cm
Depth - (Wall to the front of the radiator) & add 6cm
Please follow the instructions above with regards to the allowance added each way for the width and depth.
The height entered needs to included 20cm on top of your radiator height to allow for the drawers above. The 20cm allowance already includes the 5cm this does not need to be added extra.
For this product we advise adding your internal radiator measurements into the notes section.
Please be aware that the top shelf has an overhang of 2cm each way.
Any questions or help with measurements please contact us direct at gw_joinery@outlook.com